Ready Made Venetians and Roller Blinds

 

All our blinds come with comprehensive installation instructions for an inside or outside fit, please follow carefully for a succesful installation.

 

 

Ready Made Panel Glides

Your ready made panel glides start from 1880mm width, which is a one piece 4 track system. All the larger sizes come in a 2 piece track which you will need to join with a provided top plate. Do not over tighten the plate. The next sizes are 2180mm, 2480mm (both 5 track), 2780mm and 3080mm (both 6 track). The tracking comes with the appropriate hardware and coprehensive installation instructions for an inside or an outside fix. All the fabric panels are standard 550mm wide x 2400mm drop.

The panel glide tracking is factory standard left side stacking and closes by pulling to the right. If your door opens the opposite way, you can reverse the direction.

PLEASE FOLLOW THESE INSTRUCTIONS TO CHANGE DIRECTION.

 

Place the head rail track in front of you and undo the left end cap on the track (2 screws), pull out all the sliding tracks in one bunch. Pull out the little stopper screw from the bottom track and put it back into the top track .

Do not tighten it yet.

Now rotate the bunch of sliders 180 degrees and start sliding them back in sequence. Start by sliding in the bottom track first, only approx. 20mm in, repeat the same with the next tracks.

Once you have all the sliding tracks in a little way, you can then push them all in and lift the track up to the upright position, make sure the little screws on the sliding tracks are facing you. If correct, then re –screw the end cap onto the track. Once the cap is secured, slide all the sliders against the left end cap.

Now you can push the stopper against the top track slider and tighten it into place. Now you have changed the sliding direction to right stacking position.

 

If you live in the Brisbane, Ipswich or Northern Gold Coast areas, we do offer installation for all blinds and an On-Site width and drop adjustment service for ready made Venetians (no aluminium) and Panel glides.

Please enquire with your order.